1995 BMW R1100 Problems, Complaints & Recalls
- Compared with other R1100 years
- Not enough data 3rd of 6 for complaints
- Safety recalls
- 1 recall: check your VIN
- NHTSA crash rating
- Not rated
Owners have filed 2 complaints with NHTSA about the 1995 BMW R1100. That ranks 3rd out of 6 R1100 model years for complaints. The most reported problem area is wheels (2 complaints, 100%). There is 1 safety recall covering this model year. NHTSA has opened 1 defect investigation involving it.
- 2owner complaints
- 1safety recalls
- 1NHTSA investigations
- 0complaints mentioning a crash
Complaints are unverified owner reports and are not adjusted for sales volume.
Most common 1995 BMW R1100 problems
Complaints grouped by the part of the car owners reported, with the median mileage when the problem happened.
| Problem area | Complaints | Share | Median miles | Owners mention most | Typical repair cost |
|---|---|---|---|---|---|
| Wheels | 2 | 100% | — | — | — |
| Suspension | 1 | 50% | — | — | — |
One complaint can list several problem areas, so shares can add up to more than 100%.
Complaints by year received
1995 BMW R1100 recalls (1)
Tap a recall to see the problem, the risk and the fix.
Electrical system:wiring
Problem: Vehicle description: motorcycles. A sheet metal plate mounted to the front of the frame below the instrument cluster can cause the wiring harness to be stretched too tight as the handlebars are turned fully to one side. In addition, the wiring harness is attached to another harness with a cable tie that is placed too far forward limiting the handlebar movement.
Risk: The harness wires can be damaged or could break or pull out of the ignition switch. If the harness wires were damaged but not broken or disconnected, the electrical system could be affected while the motorcycle is being driven. Hesitation, misfiring, or "cutting out" could occur increasing the risk of a vehicle crash.
Fix: Dealers will relocate the wire tie connecting the two wiring harnesses to a point further back from the original location so that the ignition switch wiring harness has sufficient freedom of movement. Also if the wiring harness is found to be damaged, the ignition switch (with harness) will be replaced.
To see whether a specific car still has an open recall, enter its VIN on NHTSA's official recall lookup. You can also decode a VIN here.
NHTSA defect investigations
- Steering lock/ignition switch wiring (SQ97022) — opened Nov 14, 1997, closed Dec 31, 1997.
Recent owner reports
Short excerpts of the latest complaints filed with NHTSA, with personal details removed. Full reports can be searched on NHTSA.gov.
The rims on these wheels are very soft. The california highway patrol now specifies a 'hardened' rim on these wheels for their motorcycles. A known issue.
The spoke rims are too soft, causing tires to lose air.
Other BMW R1100 years
| Year | Complaints | Recalls |
|---|---|---|
| 2000 R1100 | 3 | 0 |
| 1999 R1100 | 1 | 0 |
| 1998 R1100 | 3 | 0 |
| 1997 R1100 | 0 | 1 |
| 1996 R1100 | 2 | 1 |
| 1995 | 2 | 1 |
See all BMW R1100 problems by year, every BMW model, or the BMW VIN decoder.
Similar BMW models
Embed this 1995 BMW R1100 badge on your site
Copy this code into your blog or forum post. It shows live complaint and recall counts and links back here.
Frequently asked questions
What are the most common problems with the 1995 BMW R1100?
Owners most often report wheels, suspension problems. The top one, wheels, accounts for 2 complaints.
Was there a recall on the 1995 BMW R1100?
Yes, 1 safety recall. Enter your VIN at NHTSA.gov to check whether the repairs were done on your car.
Was the 1995 BMW R1100 a good year?
Complaint data can't fully answer that, because counts aren't adjusted for sales. Compared with other R1100 model years, the 1995 has too little data to compare. Always get a pre-purchase inspection and check the VIN for open recalls.