2006 Freightliner Columbia Problems, Complaints & Recalls

Problem: Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: The vehicle's rearward visibility may be reduced, increasing the risk of a crash.

Fix: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.

Problem: Daimler Trucks North America LLC (DTNA) is recalling certain 2004-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Classic, FL80, FLD 120SD, Business Class M2, Western Star 4700, 4900, 6900, Sterling Acterra, L7500, LT7500, L8500, LT8500, L9500, and LT9500 vehicles. The vehicles may have an insufficient service brake air reservoir capacity. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."

Risk: An insufficient air reservoir volume may reduce brake effectiveness, increasing the risk of crash.

Fix: DTNA will notify owners, and dealers will add air reservoir capacity to the affected vehicles. Owner letters were mailed on November 29, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-815.

Problem: Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

Risk: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Fix: DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1-800-547-0712, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.

Problem: Daimler trucks (dtna) is recalling certain model year 2006-2013 freightliner, sterling, and western star vehicles, equipped with detroit diesel epa07 and epa10, dd13 and dd15/16 engines, manufactured from january 20, 2006, through february 20, 2012. The pump to rail high pressure fuel line support system used on these engines is sensitive to assembly torque and may be damaged during service work. As a result of other repairs, the line supports may loosen, potentially leading to fuel line cracking and a fuel leak.

Risk: A fuel leak could create a road hazard, increasing the risk of a crash. Also a fuel leak in the presence of an ignition source can result in a fire.

Fix: Dtna will notify owners, and where necessary, the high pressure fuel line support system will be replaced by dtna authorized service facilities, free of charge. The safety recall began on april 27, 2012. Owners may contact dtna at 1-800-547-0712.

Problem: Daimler trucks is recalling certain model year 2005-2011 freightliner cascadia, columbia, century, coronado, and classic xl trucks manufactured from november 1, 2004, through june 15, 2010 for the rack and pinion steering system. The lower pinion bearing may corrode and fail. A failed bearing may lead to damage of the spool valve seals. A damage spool valve seal may allow hydraulic fluid to flow to the right or left turn port instead of flowing to the return port.

Risk: The steering could unexpectedly turn left or right, making the vehicle more difficult to control and increasing the risk of a crash.

Fix: Daimler trucks will inspect the lower bearing for corrosion. If corrosion is found, the rack and pinion system will be replaced. If no corrosion is found, on the bearing, the bearing will be packed with grease and the rubber bellows will be replaced with sealant added between the bellows and the rack housing. An interim letter was mailed in december 2011. Owners may contact daimler trucks toll-free at 1-800-547-0712.

Problem: Daimler trucks is recalling certain model year 2004 through 2008 heavy trucks manufactured from july 11, 2003, through september 28, 2007, equipped with epa04 model mbe4000 engines built with plastic low pressure fuel lines and fuel filters mounted near the center of the engine on the left-hand side. The plastic low pressure fuel line between engine mounted fuel filter and engine block may develop a substantial diesel fuel leak.

Risk: This could create a road hazard increasing the risk of a crash. Fuel leakage, in the presence of an ignition source, could result in a fire.

Fix: Daimler trucks will notify owners and the remedy will be performed by detroit diesel corporation authorized repair facilities. Vehicles will be inspected and the plastic low pressure fuel line will be replaced with a steel low pressure fuel line. This service will be performed free of charge. An interim letter was mailed to owners on october 28, 2011. The safety recall began on february 21, 2012. Owners may contact daimler trucks at 1-800-547-0712.

Problem: Daimler trucks is recalling certain model year 2006-2012 freightliner business class m2, cascadia, century, columbia, coronado and sterling a-line vehicles built with meritor wabco electronic stability control (esc) system manufactured from september 15, 2005 through september 1, 2011. Under certain road and driving conditions, vehicle body roll and road inclination characteristics may adversely affect the slip angle calculation of the electronic stability control (esc) system. This might cause the esc to perceive an over steering situation and therefore apply the outer wheel brake on the front axle until the vehicle is perceived to be stable.

Risk: If the driver is slow to react during this esc intervention, the vehicle may deviate from the intended line of travel increasing the risk of a crash.

Fix: Daimler trucks will notify owners, and dealers will replace the esc module with the appropriate software version as necessary, free of charge. An interim owner notification will be mailed on or about november 21, 2011. The date for availability of the final remedy is subject to validation testing and parts availability. The safety recall began on march 28, 2012. Owners may contact daimler trucks toll-free at 1-800-547-0712.

Problem: Daimler trucks (dtna) is recalling certain model year 2006 through 2011 freightliner, cascadia, century, columbia fld, and m2, sterling 9500, and western star 4900 heavy trucks manufactured from march 20, 2006, through june 30, 2010, equipped with specific mbe4000 epa07 model engines. The intake air grid heater may short circuit and fail due to excessive internal temperatures.

Risk: A short circuited grid heater could result in a vehicle fire and injury to vehicle occupants.

Fix: Dtna will notify owners of the recall during march 2011. Another notification will be issued once the remedy is released. Dtna expects the remedy to be available by december 1, 2011. Repairs will be performed by dtna dealers free of charge. Owners may contact dtna toll-free at 1-800-547-0712. This recall is asscociated with a previous recall, campaign number 10v-341.

Problem: Daimler trucks is recalling certain model year 2006 through 2010 heavy trucks manufactured between january 17, 2006 and march 31, 2009, equipped with epa07 model mbe4000 engines built with plastic low pressure fuel lines. The plastic lines may experience leaks due to fatigue cracks caused by stress and vibration combined with high internal pressure.

Risk: If a diesel fuel leak continues undetected under certain conditions fuel may ignite on a hot engine surface and/or fuel may spill on the road increasing the risk of a crash.

Fix: Daimler trucks will notify owners and the remedy will be performed by detroit diesel corporation authorized repair facilities and direct warranty customers. The safety recall began on may 7, 2010. Owners may contact daimler trucks at 1-800-547-0712.

Problem: Daimler trucks is recalling model year 2004-2010 trucks equipped with caterpillar c15 engine. The variable valve actuation oil line may rub against the p-clips retaining the oil line, causing an oil leak.

Risk: An oil leak may result in a fire.

Fix: Daimler trucks is working with caterpillar to remedy these vehicles. Please see caterpillar's defect report 09e-020. Caterpillar will inspect and repair the necessary components free of charge. The recall began on may 5, 2009. Owners may contact caterpillar toll-free at 1-800-447-4986 or daimler trucks at 1-800-547-0712.

Problem: Daimler trucks is recalling 62,000 my 2005-2007 freightliner business class, century class, columbia, coronado, fld, classic, sterling a-line, l-line, and western star 4900 trucks. A fractured fuel line could leak diesel fuel.

Risk: If a leak continues undetected under certain conditions, fuel may ignite at a hot engine surface and/or fuel may be spilled on the road surface.

Fix: High pressure fuel lines and transfer tubes will be inspected and replaced free of charged. The recall began on july 9, 2008. Owners may contact daimler trucks at 1-800-547-0712.

Problem: On certain truck-tractors equipped with holland simplex se or se ii fifth wheels, the latch lever pivot bolt assembly may have been over-tightened which could distort the pivot bolt spacer sleeve. Corrosion or contaminates in the pivot may cause it to bind and prevent the fifth wheel jaw from latching securely around the trailer king pin.

Risk: There is a possibility that the fifth wheel may fail to latch without the driver's knowledge. When the occurs, the driver could drive away and the trailer could become disengaged increasing the risk of a crash.

Fix: Dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer. The recall began on january 3, 2008. Owners may contact freightliner at 1-800-547-0712.

Problem: On certain trucks equipped with rack and pinion steering, the ball socket assembly at the inner end of the driver side tie rod may be damaged in a sharp turn. Excessive tie rod angles may loosen the tie rod in the ball socket or damage the threaded tie rod socket attachment to the steering rack on the driver side. The threaded end of the ball socket assembly may fracture and separate.

Risk: A fractured tie rod assembly will make the vehicle more difficult to control at higher speeds and a crash may occur.

Fix: Dealers will change the front axle steering stops to prevent interference in the tie rod ball socket assembly and steering components will be replaced free of charge. The recall began on july 8, 2008, and will be mailed in phases through december 31, 2008. Owners may contact freightliner at 1-800-547-0712.

Problem: On certain trucks equipped with rack and pinion steering, the tie rod arms may have been incorrectly installed. The threaded end of the ball socket assembly may fracture and separate.

Risk: A fractured tie rod assembly will make the vehicle more difficult to control at higher speeds and a crash may occur.

Fix: Dealers will inspect for installation of the steering arms. Steering components will be replaced on trucks that have incorrectly installed tie rod arms. The recall began on may 1, 2008. Owner may contact freightliner at 1-800-547-0712.

Problem: Certain freightliner school bus chassis, heavy trucks, and thomas built school buses manufactured between july 2002 and july 3, 2007, equipped with bendix sr-7 spring brake control valves. The parker scv brass 90 degree single check valves (scv) which attach to the supply port of a bendix sr-7 spring brake modulating valve can break apart. Pieces of the parker scv can become lodged inside the sr-7 spring brake modulating valve, potentially causing either leakage out of the sr-7 valve or preventing air from properly exhausting from the sr-7 valve. Also, due to a manufacturing defect in the internal rubber check valve inside the sr-7 spring brake modulating valves, the valves can become deformed and not seat properly.

Risk: These conditions could either result in leakage and cause a delay in the application of the spring brake without warning or possibly lead to unintended vehicle rollaway or brake drag which could result in a vehicle crash, personal injury, or death.

Fix: Freightliner will notify owners and repair the vehicles free of charge. The recall began on january 11, 2008 to freightliner, sterling, and freightliner custom chassis owners; to thomas built bus owners on february 1, 2008. Owners can contact freightliner at 1-800-547-0712.

Problem: Certain freightliner school buses and trucks manufactured from october 23, 2004, to march 21, 2006. During the steering column manufacturing process two welds may have been missing.

Risk: Columns with two welds missing may fatigue and fracture and allow the steering wheel to progressively be moved out of its normal position which may cause the steering to respond differently than expected. If this condition is ignored, a crash may occur.

Fix: Freightliner will notify owners and inspect and repair the affected vehicle free of charge. The recall began on august 30, 2007. Owners can contact freightliner at 1-800-547-0712.

Problem: On certain trucks built with front axles assembled by arvinmeritor, the front spindle nut may be over-tightened causing preload on the front wheel bearings which could lead to premature bearing wear.

Risk: If rapid bearing wear is allowed to progress, the front wheel assembly may separate from the vehicle which could result in a crash.

Fix: Dealers will inspect the front hub installation for correct bearing adjustment. If the bearing adjustment is incorrect, the front wheel bearings will be replaced. The recall began on june 28, 2007. Owners may contact freightliner at 1-800-385-4357.

Problem: On certain trucks equipped with arvinmeritor front axle assemblies, the front spindle nut may be over-tightened causing preload on the front wheel bearings which may lead to premature bearing wear.

Risk: If rapid bearing wear is allowed to progress, the front wheel assembly may separate from the vehicle and cause a crash without prior warning.

Fix: Dealers will inspect the front hub installation for correct bearing adjustment. If the bearing adjustment is incorrect, the front wheel bearings will be replaced free of charge. The recall began on january 22, 2007. Owners may contact freightliner at 1-800-547-0712.

Problem: On certain trucks, the protective cover for the cab power distribution model (pdm) may be missing or improperly installed.

Risk: If the protective cover is missing or not positioned correctly, any water intrusion from an open window or windshield leak may seep through the upper dash cover seam and drip onto the pdm. Water on the pdm circuits may cause a short circuit resulting in a fire that could cause personal injury.

Fix: Dealers will install a new cover free of charge. The recall began on december 18, 2006. Owners may contact freightliner at 1-800-547-0712.

Problem: On certain trucks equipped with caterpillar diesel engines, the variable valve actuation oil line may wear against the sharp edge of the cylinder head if not positioned correctly.

Risk: The oil line may be cut on the cylinder head causing an oil leak and a possible fire.

Fix: Caterpillar, in conjunction with freightliner, will be conducting the owner notification and remedy for this campaign free of charge. Owners may call caterpillar at 309-675-6496, or freightliner at 1-800-547-0712.

Problem: On certain trucks and motor home chassis, the top flange of the front axle i-beam may fatigue and fracture.

Risk: Driver may experience loss control of the vehicle and a crash could occur without prior warning.

Fix: Dealers will inspect and replace the front axle assembly. The recall began on march 15, 2006, for phase i. Phase 2 will begin during august 2006. This recall is being conducted in two phases. Phase i will replace the complete axle assembly; and phase ii will replace the axle beam and steering knuckles. Owners may contact freightliner at 1-800-547-0712.