2012 Ic Bus Iccb Problems, Complaints & Recalls
- Compared with other Iccb years
- Not enough data 1st of 3 for complaints
- Safety recalls
- 5 recalls: check your VIN
- NHTSA crash rating
- Not rated
NHTSA has received no owner complaints about the 2012 Ic Bus Iccb so far. There are 5 safety recalls covering this model year.
- 0owner complaints
- 5safety recalls
- 0NHTSA investigations
- 0complaints mentioning a crash
Complaints are unverified owner reports and are not adjusted for sales volume.
2012 Ic Bus Iccb recalls (5)
Tap a recall to see the problem, the risk and the fix.
Electrical system:wiring
Problem: Navistar, Inc. (Navistar) is recalling certain model year 2010-2014 International Durastar trucks manufactured May 13, 2009, to June 24, 2013, 2011-2012 International Workstar trucks manufactured November 30, 2010, to September 26, 2011, and 2010-2014 IC Bus HC transit buses manufactured November 19, 2009, to April 24, 2013. The affected vehicles may have an improperly routed engine grid heater power feed cable which can result in the cable contacting the metal edge on the cab.
Risk: If the cable contacts the metal edge of the cab, it may cause an electrical short, increasing the risk of a fire.
Fix: Navistar will notify owners, and dealers will secure the power feed cable so that it cannot contact the cab, free of charge. The recall began on August 3, 2015. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15514.
Power train:automatic transmission
Problem: Navistar Inc. (Navistar) is recalling certain model year 2010-2011 IC bus 3200, model year 2012 and 2014 IC bus CE and model year 2011-2013 IC bus HC transit buses and model year 2008-2013 International 4300 and model year 2013 International Workstar commercial trucks equipped with Eaton hybrid automated transmissions. The software controlling the affected transmissions may improperly raise the vehicle's engine speed during downshifts without the driver's input.
Risk: The increase in engine speed may result in unintended acceleration, increasing the risk of a crash.
Fix: Navistar will notify owners and Eaton authorized service facilities will update the Hybrid Control Module Software version, free of charge. The recall began on May 28, 2014. Owners may contact Navistar at 1-331-332-1590.
Service brakes, air:supply:check valve
Problem: Navistar is recalling certain model year 2012-2013 ic bus ce-c, hc, and international 9400 and certain model year 2011 through 2013 international durastar, paystar, workstar, transtar, lonestar, prostar, 9200, and 9800, and certain model year 2013 international 9900, vehicles, manufactured from december 2, 2010, through january 26, 2012, and equipped with bendix atr-6 traction relay valves. In extremely cold conditions, these bendix relay valves may potentially develop internal leakage. Internal leakage can lead to air pressure being delivered to affected primary or secondary brakes causing continuous brake application.
Risk: Unexpected continuous brake application can cause the brakes to overheat and lead to a fire. Unexpected continuous brake application can cause the driver to lose control of the vehicle, increasing the risk of a crash. Also, the brakes may be applied without illuminating the brake lights, failing to give proper warning to other drivers.
Fix: Navistar will notify owners, and dealers will provide a temporary repair until bendix develops a permanent remedy. This service will be performed free of charge. The safety recall began on april 10, 2012. Owners may contact navistar at 1-800-448-7825.
Power train:axle assembly
Problem: Navistar is recalling certain model year 2012 international durastar and ic bus hc heavy trucks and buses manufactured from february 10, 2011, through february 18, 2011,that were equipped with a meritor mfs08 series non-drive front steer axle. During the assembly process, the steering attachment bolts may have been insufficiently torqued.
Risk: Insufficient torque of the steering arm bolts may result in bolt fatigue and fracture and/or arm separation, thereby potentially resulting in loss of steering control, increasing the risk of a crash.
Fix: Navistar will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on february 10, 2012. Owners may contact navistar at 1-800-448-7825.
Fuel system, gasoline:storage:tank assembly:filler pipe and cap
Problem: Navistar is recalling certain model year 2011-2012 ic ac, be, ce, hc and international 4300, and terrastar commercial trucks manufactured from february 25, 2010, through april 4, 2011, and equipped with a maxxforce 7 engine. A cap on the return fuel valve may fall off allowing air to be drawn into the fuel system possibly resulting in engine hard start, no start, or stall conditions.
Risk: Engine stall on the roadway increases the risk of a vehicle crash.
Fix: Navistar will notify owners and dealers will replace the return fuel valve cap free of charge. The safety recall began on july 18, 2011. Owners may contact navistar at 1-800-448-7825.
To see whether a specific car still has an open recall, enter its VIN on NHTSA's official recall lookup. You can also decode a VIN here.
Other Ic Bus Iccb years
See all Ic Bus Iccb problems by year, every Ic Bus model, or the VIN decoder.
Embed this 2012 Ic Bus Iccb badge on your site
Copy this code into your blog or forum post. It shows live complaint and recall counts and links back here.
Frequently asked questions
What are the most common problems with the 2012 Ic Bus Iccb?
NHTSA has no owner complaints on file yet.
Was there a recall on the 2012 Ic Bus Iccb?
Yes, 5 safety recalls. Enter your VIN at NHTSA.gov to check whether the repairs were done on your car.
Was the 2012 Ic Bus Iccb a good year?
Complaint data can't fully answer that, because counts aren't adjusted for sales. Compared with other Iccb model years, the 2012 has too little data to compare. Always get a pre-purchase inspection and check the VIN for open recalls.