2008 Kenworth T170 Problems, Complaints & Recalls
- Compared with other T170 years
- Not enough data 2nd of 15 for complaints
- Safety recalls
- 2 recalls: check your VIN
- NHTSA crash rating
- Not rated
NHTSA has received no owner complaints about the 2008 Kenworth T170 so far. There are 2 safety recalls covering this model year.
- 0owner complaints
- 2safety recalls
- 0NHTSA investigations
- 0complaints mentioning a crash
Complaints are unverified owner reports and are not adjusted for sales volume.
2008 Kenworth T170 recalls (2)
Tap a recall to see the problem, the risk and the fix.
Service brakes, air:antilock:abs warning light; electronic stability control (esc)
Problem: PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
Risk: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Fix: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.
Service brakes, air:disc
Problem: Paccar is recalling 140 my 2005, 2007-2009 t800, w900, and t660 trucks. The caliper mounting fasteners attaching the air disc brake caliper assembly to the torque plate may have received insufficient torque during the installation process. The insufficient torque may allow the air disc brake caliper assembly to become loose and possibly separate from the vehicle.
Risk: This could result in reduced braking capacity and also a road debris hazard, increasing the risk of a crash.
Fix: Dealers will inspect air disc brake caliper assemblies and replace the caliper mounting fasteners and torque properly. This service will be performed free of charge. The manufacturer has not yet provided an owner notification schedule. Owners may contact kenworth at 1-425-828-5440.
To see whether a specific car still has an open recall, enter its VIN on NHTSA's official recall lookup. You can also decode a VIN here.
Other Kenworth T170 years
| Year | Complaints | Recalls |
|---|---|---|
| 2023 T170 | 0 | 1 |
| 2022 T170 | 0 | 1 |
| 2020 T170 | 1 | 1 |
| 2019 T170 | 0 | 1 |
| 2018 T170 | 0 | 1 |
| 2017 T170 | 0 | 1 |
| 2016 T170 | 0 | 2 |
| 2015 T170 | 0 | 1 |
| 2014 T170 | 0 | 4 |
| 2013 T170 | 0 | 2 |
| 2012 T170 | 0 | 3 |
| 2011 T170 | 0 | 1 |
| 2010 T170 | 0 | 1 |
| 2009 T170 | 0 | 1 |
| 2008 | 0 | 2 |
See all Kenworth T170 problems by year, every Kenworth model, or the VIN decoder.
Similar Kenworth models
Embed this 2008 Kenworth T170 badge on your site
Copy this code into your blog or forum post. It shows live complaint and recall counts and links back here.
Frequently asked questions
What are the most common problems with the 2008 Kenworth T170?
NHTSA has no owner complaints on file yet.
Was there a recall on the 2008 Kenworth T170?
Yes, 2 safety recalls. Enter your VIN at NHTSA.gov to check whether the repairs were done on your car.
Was the 2008 Kenworth T170 a good year?
Complaint data can't fully answer that, because counts aren't adjusted for sales. Compared with other T170 model years, the 2008 has too little data to compare. Always get a pre-purchase inspection and check the VIN for open recalls.