2000 Mack CL Problems, Complaints & Recalls
- Compared with other CL years
- Not enough data 5th of 14 for complaints
- Safety recalls
- 4 recalls: check your VIN
- NHTSA crash rating
- Not rated
NHTSA has received no owner complaints about the 2000 Mack CL so far. There are 4 safety recalls covering this model year.
- 0owner complaints
- 4safety recalls
- 0NHTSA investigations
- 0complaints mentioning a crash
Complaints are unverified owner reports and are not adjusted for sales volume.
2000 Mack CL recalls (4)
Tap a recall to see the problem, the risk and the fix.
Steering:linkages:tie rod assembly
Problem: On some heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets, the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
Risk: If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
Fix: Dealers will replace the ball socket assemblies. This campaign will supersede nhtsa recall nos. 01v-140-005 (mack sc0270) and 00v-246-103 (mack sc0262). Owner notification began december 27, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610-709-3337.
Suspension:rear
Problem: On certain heavy duty trucks equipped with dana spicer tandem drive axle models ds463, an undersized attachment weld may fracture without warning.
Risk: The loss of this attachment to the vehicle chassis can adversely affect vehicle handling or driver control.
Fix: The dealers will remove the suspect bracket, inspect the axle housing, and reweld the bracket to the axle housing. Owner notification began april 22, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610-709-3337.
Service brakes, air:controls, pedals and linkages
Problem: Vehicle description: heavy duty trucks equipped with certain meritor-wabco brake system two and four port relay valves. The valve may stick open when a high-pressure application is released.
Risk: When the valve sticks open, it can result in a total loss of air from either the service or the park brake system. The driver may lose braking ability under a service application, possibly resulting in a vehicle crash.
Fix: Dealers will replace these valves. Owner notification began november 16, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3011 or meritor wabco at 800-535-5560.
Vehicle speed control:accelerator pedal
Problem: Vehicle description: class 8 trucks equipped with felsted electronic accelerator pedals. The return springs can break on the accelerator pedals that are equipped with stainless steel or electroplated wire return springs.
Risk: This condition could cause the pedal to go to full throttle if both return springs break, increasing the risk of a crash.
Fix: Replacement accelerator pedals equipped with return springs manufactured of music wire with one additional coil on each spring and with an organic coating, eliminating electroplating will be installed.
To see whether a specific car still has an open recall, enter its VIN on NHTSA's official recall lookup. You can also decode a VIN here.
Other Mack CL years
| Year | Complaints | Recalls |
|---|---|---|
| 2008 CL | 1 | 1 |
| 2007 CL | 0 | 3 |
| 2006 CL | 0 | 2 |
| 2005 CL | 0 | 2 |
| 2004 CL | 0 | 2 |
| 2003 CL | 0 | 2 |
| 2002 CL | 0 | 3 |
| 2001 CL | 0 | 4 |
| 2000 | 0 | 4 |
| 1999 CL | 1 | 6 |
| 1998 CL | 1 | 2 |
| 1997 CL | 0 | 1 |
| 1996 CL | 0 | 1 |
| 1995 CL | 1 | 0 |
See all Mack CL problems by year, every Mack model, or the VIN decoder.
Embed this 2000 Mack CL badge on your site
Copy this code into your blog or forum post. It shows live complaint and recall counts and links back here.
Frequently asked questions
What are the most common problems with the 2000 Mack CL?
NHTSA has no owner complaints on file yet.
Was there a recall on the 2000 Mack CL?
Yes, 4 safety recalls. Enter your VIN at NHTSA.gov to check whether the repairs were done on your car.
Was the 2000 Mack CL a good year?
Complaint data can't fully answer that, because counts aren't adjusted for sales. Compared with other CL model years, the 2000 has too little data to compare. Always get a pre-purchase inspection and check the VIN for open recalls.