2020 Terex General 65 Problems, Complaints & Recalls
- Compared with other General 65 years
- Not enough data 1st of 8 for complaints
- Safety recalls
- 3 recalls: check your VIN
- NHTSA crash rating
- Not rated
NHTSA has received no owner complaints about the 2020 Terex General 65 so far. There are 3 safety recalls covering this model year.
- 0owner complaints
- 3safety recalls
- 0NHTSA investigations
- 0complaints mentioning a crash
Complaints are unverified owner reports and are not adjusted for sales volume.
2020 Terex General 65 recalls (3)
Tap a recall to see the problem, the risk and the fix.
Trailer hitches
Problem: Ring Power Corporation (Ring Power) is recalling certain 2020 Terex General 65, 2020-2021 C6000, 2020-2022 C4000, and TC55 vehicles. The incorrect pintle hitch may have been installed without reinforced bracing, resulting in the rear bumper hitch plate bending.
Risk: The pintle hitch may fail, causing a loss of trailer control and increasing the risk of a crash.
Fix: Ring Power will inspect, replace the pintle hitch, and install bracing. Damaged bumpers will be replaced. All repairs will be performed free of charge. Owner notification letters are expected to be mailed October 16, 2026. Owners may contact Ring Power's customer service at 904-613-0035. Ring Power's number for this recall is 23402.
Equipment
Problem: Ring Power Corporation (Ring Power) is recalling certain 2019-2026 Terex C4000, C5000, C6000, and General 65 digger derrick trucks. An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.
Risk: Without a retaining pin, the pole guide arm may fall, increasing the risk of injury to people around the truck.
Fix: Ring Power will inspect and replace the weldment plate as necessary, free of charge. Owner notification letters are expected to be mailed September 2026. Owners may contact Ring Power's customer service at 1-904-737-7730. Ring Power's number for this recall is UTC0001.
Equipment
Problem: Terex South Dakota, Inc. (Terex) is recalling certain 2019-2026 General 65, General 80, General 95, C4000, C5000, and C6000 digger utility trucks equipped with pole guides. An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.
Risk: Without a retaining pin, the pole guide arm may fall, increasing the risk of injury to people around the truck.
Fix: Owners will inspect the plate weldment for any cracks or abnormal welds. Dealers or owners will replace the plate weldment as necessary, free of charge. Owner notification letters were mailed June 2, 2026. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN737.
To see whether a specific car still has an open recall, enter its VIN on NHTSA's official recall lookup. You can also decode a VIN here.
Other Terex General 65 years
← 2019 General 65 · 2021 General 65 →
| Year | Complaints | Recalls |
|---|---|---|
| 2026 General 65 | 0 | 2 |
| 2025 General 65 | 0 | 2 |
| 2024 General 65 | 0 | 2 |
| 2023 General 65 | 0 | 2 |
| 2022 General 65 | 0 | 3 |
| 2021 General 65 | 0 | 2 |
| 2020 | 0 | 3 |
| 2019 General 65 | 0 | 2 |
See all Terex General 65 problems by year, every Terex model, or the VIN decoder.
Embed this 2020 Terex General 65 badge on your site
Copy this code into your blog or forum post. It shows live complaint and recall counts and links back here.
Frequently asked questions
What are the most common problems with the 2020 Terex General 65?
NHTSA has no owner complaints on file yet.
Was there a recall on the 2020 Terex General 65?
Yes, 3 safety recalls. Enter your VIN at NHTSA.gov to check whether the repairs were done on your car.
Was the 2020 Terex General 65 a good year?
Complaint data can't fully answer that, because counts aren't adjusted for sales. Compared with other General 65 model years, the 2020 has too little data to compare. Always get a pre-purchase inspection and check the VIN for open recalls.