2006 Altec AT200A Problems, Complaints & Recalls
- Compared with other AT200A years
- Not enough data 2nd of 15 for complaints
- Safety recalls
- 2 recalls: check your VIN
- NHTSA crash rating
- Not rated
NHTSA has received no owner complaints about the 2006 Altec AT200A so far. There are 2 safety recalls covering this model year.
- 0owner complaints
- 2safety recalls
- 0NHTSA investigations
- 0complaints mentioning a crash
Complaints are unverified owner reports and are not adjusted for sales volume.
2006 Altec AT200A recalls (2)
Tap a recall to see the problem, the risk and the fix.
Equipment
Problem: Altec is recalling certain at35-g, at37-g, at235, and at237 aerial devices manufactured from january 2005 through october 2008. These units are equipped with billet steel counterweight that is welded in place. In the event of weld failure, the counterweight may fall out while travelling.
Risk: If these steel pieces fall in the path of the vehicle or other traffic, a vehicle crash involving death or serious injury may result.
Fix: Altec has developed kits to improve the attachment of the billet steel counterweights. Customers at their option may perform the repair or have a dealer install the kit free of charge. The safety recall is expected to begin during april 2011. Owners may contact altec at 1-877-462-5832.
Steering:hydraulic power assist:hose, piping, and connections
Problem: Altec is recalling certain model year 2006-2007 at200a, at235, model year 2007-2010 at235p and model year 2008 at3xg trucks built on gm chassis. There is a potential hydraulic hose routing condition in the engine compartment. The hose could contact and cause some abrasions to an oem 12v chassis wire or possibly rub on the steel power steering line which may lead to possible damage of the hydraulic line.
Risk: This could result in a burst hydraulic hose damage wiring, or a fire.
Fix: Altec will provide instructions to dealers on how to inspect and install the new bracket free of charge. This service will be performed free of charge. The safety recall began on september 15, 2010. Owners may contact altec at 1-877-462-5832.
To see whether a specific car still has an open recall, enter its VIN on NHTSA's official recall lookup. You can also decode a VIN here.
Other Altec AT200A years
| Year | Complaints | Recalls |
|---|---|---|
| 2024 AT200A | 0 | 1 |
| 2023 AT200A | 0 | 1 |
| 2022 AT200A | 0 | 2 |
| 2021 AT200A | 0 | 2 |
| 2020 AT200A | 0 | 2 |
| 2019 AT200A | 0 | 2 |
| 2018 AT200A | 3 | 3 |
| 2017 AT200A | 0 | 3 |
| 2016 AT200A | 0 | 2 |
| 2013 AT200A | 0 | 1 |
| 2012 AT200A | 0 | 3 |
| 2011 AT200A | 0 | 2 |
| 2010 AT200A | 0 | 2 |
| 2007 AT200A | 0 | 2 |
| 2006 | 0 | 2 |
See all Altec AT200A problems by year, every Altec model, or the VIN decoder.
Embed this 2006 Altec AT200A badge on your site
Copy this code into your blog or forum post. It shows live complaint and recall counts and links back here.
Frequently asked questions
What are the most common problems with the 2006 Altec AT200A?
NHTSA has no owner complaints on file yet.
Was there a recall on the 2006 Altec AT200A?
Yes, 2 safety recalls. Enter your VIN at NHTSA.gov to check whether the repairs were done on your car.
Was the 2006 Altec AT200A a good year?
Complaint data can't fully answer that, because counts aren't adjusted for sales. Compared with other AT200A model years, the 2006 has too little data to compare. Always get a pre-purchase inspection and check the VIN for open recalls.