2018 Altec AT200A Problems, Complaints & Recalls
- Compared with other AT200A years
- Not enough data 1st of 15 for complaints
- Safety recalls
- 3 recalls: check your VIN
- NHTSA crash rating
- Not rated
Owners have filed 3 complaints with NHTSA about the 2018 Altec AT200A. That is the most of any AT200A model year in the database (15 years). The most reported problem area is suspension (3 complaints, 100%). There are 3 safety recalls covering this model year.
- 3owner complaints
- 3safety recalls
- 0NHTSA investigations
- 0complaints mentioning a crash
Complaints are unverified owner reports and are not adjusted for sales volume.
Most common 2018 Altec AT200A problems
Complaints grouped by the part of the car owners reported, with the median mileage when the problem happened.
| Problem area | Complaints | Share | Median miles | Owners mention most | Typical repair cost |
|---|---|---|---|---|---|
| Suspension | 3 | 100% | — | — | — |
One complaint can list several problem areas, so shares can add up to more than 100%.
2018 Altec AT200A recalls (3)
Tap a recall to see the problem, the risk and the fix.
Equipment:other:labels; suspension:front:springs:coil springs
Problem: Altec Industries, Inc. (Altec) is recalling certain 2017-2024 Ford E350 van chassis equipped with a AT200A devices. The units mounted on certain Ford E350 van chassis with Gross Axle Weight Rating (GAWR) of 4050 and 4200 pounds, may fail at high loads due to a defect in the front axle.
Risk: Overload of the front axle capacity could cause it to fail and instability, increasing the risk of injury.
Fix: Ford dealers will install front springs, insulators, and nuts, free of charge. Additionally, a new label will be provided to indicate the upgraded gross axle weight rating. Owner notification letters were mailed February 14, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3206.
Electrical system
Problem: Altec Industries Inc. (Altec) is recalling certain 2016-2022 van mounted AT200A and AT30G vehicles. The ground-fault circuit interrupter (GFCI) outlet may not provide adequate circuit protection against an electrical overload condition.
Risk: An overloaded electrical circuit can increase the risk of a fire.
Fix: Altec will install a new GFCI outlet with a circuit-breaker and new wiring, free of charge. Owner notification letters are expected to be mailed August 29, 2022. Owners may contact Altec's customer service at 205-991-7733. Altec's number for this recall is CSN 3008.
Tires:markings
Problem: Altec Industries Inc. (Altec) is recalling certain 2016-2018 AT200A vehicles built on Ford E-350 Cutaway chassis. The rear tire size and load rating may be incorrect, possibly resulting in the vehicle being overloaded.
Risk: An overload condition may reduce the vehicle's stability or result in tire failure, increasing the risk of a crash.
Fix: Altec will notify owners, and dealers will inspect the tires and replace any that are not the correct size and load rating, free of charge. The recall began May 22, 2020. Owners may contact Altec customer service at 1-877-462-5832.
To see whether a specific car still has an open recall, enter its VIN on NHTSA's official recall lookup. You can also decode a VIN here.
Recent owner reports
Short excerpts of the latest complaints filed with NHTSA, with personal details removed. Full reports can be searched on NHTSA.gov.
Driver side leaf spring rebound clips are broken
Driver side leaf spring rebound clips are broken
Driver side leaf spring rebound clips are broken.
Other Altec AT200A years
| Year | Complaints | Recalls |
|---|---|---|
| 2024 AT200A | 0 | 1 |
| 2023 AT200A | 0 | 1 |
| 2022 AT200A | 0 | 2 |
| 2021 AT200A | 0 | 2 |
| 2020 AT200A | 0 | 2 |
| 2019 AT200A | 0 | 2 |
| 2018 | 3 | 3 |
| 2017 AT200A | 0 | 3 |
| 2016 AT200A | 0 | 2 |
| 2013 AT200A | 0 | 1 |
| 2012 AT200A | 0 | 3 |
| 2011 AT200A | 0 | 2 |
| 2010 AT200A | 0 | 2 |
| 2007 AT200A | 0 | 2 |
| 2006 AT200A | 0 | 2 |
See all Altec AT200A problems by year, every Altec model, or the VIN decoder.
Embed this 2018 Altec AT200A badge on your site
Copy this code into your blog or forum post. It shows live complaint and recall counts and links back here.
Frequently asked questions
What are the most common problems with the 2018 Altec AT200A?
Owners most often report suspension problems. The top one, suspension, accounts for 3 complaints.
Was there a recall on the 2018 Altec AT200A?
Yes, 3 safety recalls. Enter your VIN at NHTSA.gov to check whether the repairs were done on your car.
Was the 2018 Altec AT200A a good year?
Complaint data can't fully answer that, because counts aren't adjusted for sales. Compared with other AT200A model years, the 2018 has too little data to compare. Always get a pre-purchase inspection and check the VIN for open recalls.