2001 Mack CV Problems, Complaints & Recalls
- Compared with other CV years
- Not enough data 3rd of 11 for complaints
- Safety recalls
- 6 recalls: check your VIN
- NHTSA crash rating
- Not rated
NHTSA has received no owner complaints about the 2001 Mack CV so far. There are 6 safety recalls covering this model year.
- 0owner complaints
- 6safety recalls
- 0NHTSA investigations
- 0complaints mentioning a crash
Complaints are unverified owner reports and are not adjusted for sales volume.
2001 Mack CV recalls (6)
Tap a recall to see the problem, the risk and the fix.
Service brakes, air:drum
Problem: On certain class 8 chassis built with hendrickson lift axles which contained webb brake drums, the brake drums could experience premature crack of the braking surface resulting in reduction or complete loss of braking on that wheel end or loss of brake drum pieces.
Risk: Loss of braking ability could result in a vehicle crash, possibly causing injuries or death.
Fix: Webb wheel is conducting the owner notification and remedy for this campaign. Webb will notify customers, inspect the brake drums and replace any drums that fail inspection. Owners should contact webb at 1-800-633-3256 or mack at 1-610-709-3337.
Service brakes, air:supply:check valve
Problem: On certain trucks equipped with meritor wabco pneumatic anitlock brake system (abs) valve packages, the assembly bolts on these valve packages were not tightened correctly.
Risk: Bolts torqued below specification will not reliably prevent air leakage at the affected abs valve package interface joints once the component begins normal vehicle operation. If air leaks develop at any of the abs valve package interface joints, brake system pressure reductions could occur during braking or normal operation with units equipped with the traction control option, potentially extending stopping distances, possibly resulting in a vehicle crash.
Fix: Dealers will tighten the fasteners to the proper specification. Owner notification began june 13, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1610-709-3337..
Suspension:rear
Problem: On certain heavy duty trucks equipped with dana spicer tandem drive axle models ds463, an undersized attachment weld may fracture without warning.
Risk: The loss of this attachment to the vehicle chassis can adversely affect vehicle handling or driver control.
Fix: The dealers will remove the suspect bracket, inspect the axle housing, and reweld the bracket to the axle housing. Owner notification began april 22, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610-709-3337.
Steering:hydraulic power assist:pump
Problem: Vehicle description: trucks equipped with e-tech engines. A condition exists on the auxiliary drive shaft of the e-tech engine that causes the loss of power steering on vehicles where the power steering pump is mounted off the front of the engine.
Risk: This could result in the loss of power steering.
Fix: Dealers will inspect the vehicles and replace the nut that holds the gear to the auxiliary drive shaft. Owner notification began march 22, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3011.
Suspension:front:springs:coil springs
Problem: Vehicle description: class a heavy duty trucks with 18,000 lb. Front axles may have front springs installed that are rated for the 14,600 lb. Front axle.
Risk: Front spring failure could result in loss of vehicle control.
Fix: Dealers will replace both springs. Owner notification began december 26, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3011.
Service brakes, air:controls, pedals and linkages
Problem: Vehicle description: heavy duty trucks equipped with certain meritor-wabco brake system two and four port relay valves. The valve may stick open when a high-pressure application is released.
Risk: When the valve sticks open, it can result in a total loss of air from either the service or the park brake system. The driver may lose braking ability under a service application, possibly resulting in a vehicle crash.
Fix: Dealers will replace these valves. Owner notification began november 16, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3011 or meritor wabco at 800-535-5560.
To see whether a specific car still has an open recall, enter its VIN on NHTSA's official recall lookup. You can also decode a VIN here.
Other Mack CV years
| Year | Complaints | Recalls |
|---|---|---|
| 2008 CV | 0 | 3 |
| 2007 CV | 0 | 8 |
| 2006 CV | 0 | 5 |
| 2005 CV | 2 | 4 |
| 2004 CV | 0 | 6 |
| 2003 CV | 2 | 5 |
| 2002 CV | 0 | 3 |
| 2001 | 0 | 6 |
| 2000 CV | 0 | 3 |
| 1999 CV | 0 | 2 |
| 1998 CV | 0 | 1 |
See all Mack CV problems by year, every Mack model, or the VIN decoder.
Embed this 2001 Mack CV badge on your site
Copy this code into your blog or forum post. It shows live complaint and recall counts and links back here.
Frequently asked questions
What are the most common problems with the 2001 Mack CV?
NHTSA has no owner complaints on file yet.
Was there a recall on the 2001 Mack CV?
Yes, 6 safety recalls. Enter your VIN at NHTSA.gov to check whether the repairs were done on your car.
Was the 2001 Mack CV a good year?
Complaint data can't fully answer that, because counts aren't adjusted for sales. Compared with other CV model years, the 2001 has too little data to compare. Always get a pre-purchase inspection and check the VIN for open recalls.