Jeep Grand Cherokee Service Brakes, Hydraulic Problems

Model years: 2018, 2019

Problem: Chrysler (FCA US, LLC) is recalling certain 2018-2019 Jeep Grand Cherokee and Dodge Durango vehicles. A malfunction in the antilock-brake system (ABS) module may incorrectly illuminate the brake lights and disable the ABS and electronic stability control (ESC). In addition, the vehicle operator may be able to start and shift out of Park without the brake pedal being applied.

Risk: A vehicle that can be started and shifted out of Park without applying the brake pedal can result in a vehicle rollaway. Disabled ABS and ESC systems can reduce vehicle handling and control in certain driving situations. Brake lights that incorrectly illuminate can fail to properly indicate the driver's intention to following traffic. Any of these scenarios can increase the risk of a crash.

Fix: Dealers will replace the integrated pressure transducer and update the ABS module software, as necessary free of charge. Owner notification letters were mailed December 16, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 94B. This recall replaces previous recall number 22V-426. Vehicles previously remedied under 22V-426 will need to have the new remedy completed.

Model years: 2018, 2019

Problem: Chrysler (FCA US, LLC) is recalling certain 2018-2019 Jeep Grand Cherokee and Dodge Durango vehicles. A malfunction in the antilock-brake system (ABS) module may illuminate the brake lights, and allow the vehicle to start and shift out of Park without the brake pedal being applied.

Risk: A vehicle that starts and shifts out of Park without applying the brake pedal can result in vehicle rollaway, increasing the risk of a crash without prior warning and/or injury to others outside of the vehicle.

Fix: This recall is replaced by NHTSA recall number 24V838. Vehicles already repaired under this recall will need to have the new remedy completed. The remedy includes updated HCU/ABS module software that prevents the HCU/ABS module from falsely reading pressure in the primary circuit. FCA has decided to do a two-Phase Campaign remedy schedule. Phase 1 began November 17, 2022. Phase 2 begin date has not been determined yet. Interim owner notification letters explaining the safety risk were mailed July 28, 2020. Owner notification letters were mailed on November 29, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Z48.

Model years: 2011, 2012, 2013, 2014

Problem: Chrysler (FCA US LLC) is recalling certain 2011-2014 Dodge Durango and Jeep Grand Cherokee vehicles. The affected vehicles had brake booster shields installed under a previous campaign to prevent water from entering the brake booster and limiting braking ability. This recall is to verify that the brake booster shield installation was performed properly.

Risk: If the brake booster shield was not installed properly, the vehicle's braking ability may be reduced, increasing the risk of a crash.

Fix: Chrysler will notify owners, and dealers will inspect the brake booster shield, correcting the installation as necessary, free of charge. The recall began November10, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T59.

Model years: 2015, 2016

Problem: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Jeep Grand Cherokee and Dodge Durango vehicles manufactured December 9, 2015, to January 14, 2016. In the affected vehicles, the left front brake caliper may crack due to being made from an incorrect material.

Risk: A cracked brake caliper may lengthen the distance needed to stop the vehicle and increase the risk of a crash.

Fix: Chrysler will notify owners, and dealers will inspect the front left brake caliper and depending on its casting date, replace it, free of charge. The recall is expected to begin on May 12, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S16.

Model years: 2011, 2012, 2013, 2014

Problem: Chrysler Group LLC (Chrysler) is recalling certain model year 2011-2014 Jeep Grand Cherokee and Dodge Durango vehicles manufactured from January 5, 2010, through September 8, 2013. The subject vehicles have a brake booster with a center shell that may corrode and allow water to get inside.

Risk: The water inside could freeze and limit the braking ability of the vehicle, increasing the risk of a crash.

Fix: Chrysler will notify owners, and dealers will add a water diverter shield to the booster after the booster has been tested to confirm it can hold an acceptable amount of vacuum pressure. If the booster inspection confirms an unacceptable loss of vacuum pressure, the booster will be replaced. Repairs will be made free of charge. The recall began on May 30, 2014. Owners may contact Chrysler at 1-800-853-1403. Chrysler's recall campaign number is P14.

Model years: 2012, 2013

Problem: Chrysler Group LLC (Chrysler) is recalling certain model year 2012-2013 Dodge Durango and Jeep Grand Cherokee vehicles manufactured October 11, 2011, through October 1, 2012. Under certain braking events, the Ready Alert Braking System (RAB) may result in the driver experiencing a hard brake pedal feel.

Risk: If the driver experiences a hard brake pedal, the driver may not push the pedal as intended, lengthening the distance needed to stop the vehicle and increasing the risk of a crash.

Fix: Chrysler will notify owners, and dealers will update the ABS module software, free of charge. The recall began on April 3, 2014. Owners may contact Chrysler at 1-800-853-1403. Chrysler's number associated with this recall is P05.

Model years: 2014

Problem: Chrysler Group, LLC (Chrysler) is recalling certain model year 2014 Jeep Grand Cherokee vehicles manufactured January 8, 2013, through August 20, 2013. Due to a disruption of computer communications and loose alternator ground wires, the affected vehicles may experience random illumination of multiple instrument cluster warning lights, loss of cluster illumination and loss of anti-lock brake system (ABS) and electronic stability control (ESC) function. Because of these conditions, the vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 101, "Controls and Displays," and No. 126, "Electronic Stability Control Systems."

Risk: A loss of ABS and ESC function reduces the driver's ability to control the vehicle. Drivers would not be warned of brake system failures or any other failures which would be illuminated on the dashboard display. Either condition increases the risk of a crash.

Fix: Chrysler will notify owners, and dealers will update the ABS and instrument cluster module software and tighten the alternator ground wire, free of charge. The recall began on November 19, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N58.

Model years: 2010

Problem: Chrysler is recalling certain model year 2010 chrysler sebring; dodge avenger and nitro; jeep liberty, commander and grand cherokee; and model year 2009-2010 dodge ram truck. These vehicles may have been built with an improperly formed or missing brake booster input rod retaining clip.

Risk: This could result in brake failure without warning which could cause a crash.

Fix: Chrysler will replace the brake booster input rod retaining clip free of charge. The safety recall is expected to begin during february 2010. Owners may contact chrysler at 1-800-853-1403.

Model years: 2006, 2007

Problem: On certain sport utility vehicles, the software programmed into the abs electronic control module may allow a momentary delay in braking when coasting up a hill during certain conditions.

Risk: This could cause a crash without warning.

Fix: Dealers will reprogram the abs electronic control module with new software that prevents this condition free of charge. The recall began on october 22, 2007. Owners may contact chrysler at 1-800-853-1403.

Model years: 2007, 2008

Problem: On certain sport utility vehicles, front brake calipers in a certain lot may have been manufactured from gray iron instead of ductile iron as designed and could fracture without warning.

Risk: This would increase the vehicle's stopping distance and could cause a crash.

Fix: Dealers will inspect the front brake calipers to see if they fall into this lot and, if so, will replace them free of charge. The recall began on october 22, 2007. Owners may contact daimlerchrysler at 1-800-853-1403.

Model years: 2007

Problem: On certain vehicles, the antilock brake system (abs) control module software may cause the rear brakes to lock up during certain braking conditions.

Risk: This could result in a loss of vehicle control and cause a crash without warning.

Fix: Dealers will reprogram the abs electronic control unit. The recall began on february 19, 2007. Owners may contact daimlerchrysler at 1-800-853-1403.

Model years: 1996, 1997, 1998

Problem: Vehicle description: passenger and multi-purpose vehicles originally sold or currently registered in the states of connecticut, illinois, indiana, maine, maryland, massachusetts, michigan, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, or wisconsin, and the district of columbia. The front disc brake rotors can experience severe corrosion if operated for an extensive period in the "salt belt." if the rotors are not replaced, the corrosion can eventually compromise the structural integrity of the stamped steel center hub section of the rotor.

Risk: The reduced strength can allow the cast iron wear surface to separate from the hub, reducing the brake effectiveness of the vehicle.

Fix: Dealers will replace these rotors with rotors that are coated with a corrosion protection.

Model years: 1995

Problem: Vehicle description: passenger and multi-purpose vehicles originally sold or currently registered in the states of connecticut, illinois, indiana, maine, maryland, massachusetts, michigan, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, or wisconsin, and the district of columbia. The front disc brake rotors can experience severe corrosion if operated for an extensive period in the "salt belt." if the rotors are not replaced, the corrosion can eventually compromise the structural integrity of the stamped steel center hub section of the rotor.

Risk: The reduced strength can allow the cast iron wear surface to separate from the hub, reducing the brake effectiveness of the vehicle.

Fix: Dealers will replace these rotors with rotors that are coated with a corrosion protection.

Model years: 1998

Problem: Vehicle description: multi-purpose passenger vehicles. The power brake booster vacuum reservoir diaphragm can split or tear.

Risk: This can cause an increase in engine idle speed and a loss of power assist during brake application without prior warning.

Fix: Dealers will inspect the brake booster date code and any boosters with the suspect manufacturing date range will be replaced.