2008 Peterbilt 348 Problems, Complaints & Recalls

Source: NHTSA · Updated Apr 7, 2020 · 0 owner complaints analyzed

Compared with other 348 years
Not enough data 1st of 16 for complaints
NHTSA crash rating
Not rated

NHTSA has received no owner complaints about the 2008 Peterbilt 348 so far. There are 2 safety recalls covering this model year.

Complaints are unverified owner reports and are not adjusted for sales volume.

Compare with another car

2008 Peterbilt 348 recalls (2)

Tap a recall to see the problem, the risk and the fix.

Service brakes, air:antilock:abs warning light; electronic stability control (esc)Apr 6, 2020 · NHTSA campaign 20V199000 · 460,515 vehicles

Problem: PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."

Risk: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.

Fix: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.

Engine and engine cooling:engineMay 26, 2015 · NHTSA campaign 15V309000 · 4,823 vehicles

Problem: PACCAR Incorporated (PACCAR) is recalling certain model year 2010-2016 Kenworth T440, T800, and W900 trucks manufactured August 31, 2009, to April 20, 2015, and 2008-2015 Peterbilt 320, 337, 348, 365, 382, and 384 trucks manufactured July 27, 2007, to April 28, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces.

Risk: If engine oil comes into contact with a hot surface, there is an increased risk of a fire.

Fix: Cummins will notify owners on behalf of PACCAR, and Cummins service centers will administer the repairs which include securing the ends of the 90-degree elbow and reprogramming the electronic control module (ECM) with software that can adjust the engine output under misfire conditions to limit crankcase pressures. These repairs will be performed free of charge. The recall began on June 12, 2015. Owners may contact Kenworth customer service at 1-425-828-5000, Peterbilt customer service at 1-940-591-4000 or Cummins Inc. at 1-800-343-7357. PACCAR's number for this recall is 15KWH and 515-G.

To see whether a specific car still has an open recall, enter its VIN on NHTSA's official recall lookup. You can also decode a VIN here.

Other Peterbilt 348 years

2009 348 →

See all Peterbilt 348 problems by year, every Peterbilt model, or the VIN decoder.

Similar Peterbilt models

Embed this 2008 Peterbilt 348 badge on your site

Copy this code into your blog or forum post. It shows live complaint and recall counts and links back here.

Frequently asked questions

What are the most common problems with the 2008 Peterbilt 348?

NHTSA has no owner complaints on file yet.

Was there a recall on the 2008 Peterbilt 348?

Yes, 2 safety recalls. Enter your VIN at NHTSA.gov to check whether the repairs were done on your car.

Was the 2008 Peterbilt 348 a good year?

Complaint data can't fully answer that, because counts aren't adjusted for sales. Compared with other 348 model years, the 2008 has too little data to compare. Always get a pre-purchase inspection and check the VIN for open recalls.