2017 Peterbilt 367 Problems, Complaints & Recalls

Source: NHTSA · Updated Oct 14, 2021 · 0 owner complaints analyzed

Compared with other 367 years
Not enough data 1st of 22 for complaints
NHTSA crash rating
Not rated

NHTSA has received no owner complaints about the 2017 Peterbilt 367 so far. There are 6 safety recalls covering this model year. NHTSA has opened 1 defect investigation involving it.

Complaints are unverified owner reports and are not adjusted for sales volume.

Compare with another car

2017 Peterbilt 367 recalls (6)

Tap a recall to see the problem, the risk and the fix.

Service brakes, air:antilock:abs warning light; electronic stability control (esc)Apr 6, 2020 · NHTSA campaign 20V199000 · 460,515 vehicles

Problem: PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."

Risk: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.

Fix: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.

Engine and engine cooling:engine:dieselSep 21, 2018 · NHTSA campaign 18V657000 · 48,896 vehicles

Problem: PACCAR Incorporated (PACCAR) is recalling certain 2017-2019 Kenworth C500, T600, T660, T680, T800, T880 and W900 trucks, as well as Peterbilt 367, 386, 389, 567, 579 and 587 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.

Risk: If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.

Fix: Cummins will notify owners, and dealers will replace the suspect fuel pump cooling circuit screen, free of charge. The recall began November 21, 2018. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's number for this recall is 18E081.

Fuel system, dieselJul 13, 2017 · NHTSA campaign 17V443000 · 1,737 vehicles

Problem: PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Peterbilt 367, 389, 567, 579 and 587 trucks, and 2018 Kenworth C500, T680, T800, T880 and W900 trucks equipped with Cummins ISX 15L engines. These engines have a fuel pump whose drive gear could possibly slip on its drive shaft, causing a fuel pump function loss, resulting in an engine stall.

Risk: An engine stall can increase the risk of a crash.

Fix: Cummins will notify the vehicle purchaser, and Cummins dealers will replace the fuel pumps, free of charge. The recall began July 1, 2017. Owners may contact Cummins customer service at 1-800-286-6467 or PACCAR customer service at 1-425-468-7400. PACCAR's number for this recall is C1909.

Exterior lighting:brake lights:switchDec 5, 2016 · NHTSA campaign 16V872000 · 2,046 vehicles

Problem: PACCAR Incorporated (PACCAR) is recalling certain model year 2017 Peterbilt 325, 330, 337, 348, 365, 367, 386, 389, and 587 vehicles manufactured April 20, 2016, to June 13, 2016. The brake lights may not illuminate when the brakes are applied. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: If the brake lights do not illuminate when the brakes are applied, other drivers will be unaware the vehicle is stopping, which can increase the risk of a crash.

Fix: PACCAR will notify owners, and dealers will inspect and replace any brake light switches with date code 08-01760, free of charge. The recall began on January 26, 2017. Owners may contact Peterbilt customer service at 1-940-591-4000. Paccar's number for this recall is 816-F.

TiresNov 4, 2016 · NHTSA campaign 16V803000 · 202 vehicles

Problem: PACCAR Incorporated (PACCAR) is recalling certain model year 2017 Kenworth K370, T270, T370, T440, T660, T800 trucks manufactured February 2, 2016, to October 13, 2016, and Peterbilt 330, 337, 348, 367, 389, 567, and 579 trucks manufactured March 7, 2016, to October 5, 2016. The affected vehicles are equipped with certain Goodyear LHS Load Range G tires, size 295/75R22.5 G399A, that due to incomplete adhesion, have a tire tread that may partially separate.

Risk: A partial tread separation may increase the risk of a crash.

Fix: Goodyear will notify the owners of the affected Peterbilt and Kenworth vehicles and Goodyear dealers will replace the affected tires, free of charge. The recall began on December 14, 2016. To find a Goodyear dealer, owners should contact Goodyear Consumer Relations at 1-800-592-3267. Consumers may also contact Kenworth customer service at 1-425-828-5000 and Peterbilt customer service at 1-940-591-4000. PACCAR's number for this recall is 1016G (PB) (Peterbilt), and 16KWC (Kenworth).

Electrical system:ignition:moduleJun 10, 2016 · NHTSA campaign 16V426000 · 3,227 vehicles

Problem: PACCAR Incorporated (PACCAR) is recalling certain model year 2017 Kenworth C500, T660, T680, T800, T880, and W900 vehicles manufactured March 9, 2016, to April 26, 2016 and 2017 Peterbilt 320, 365, 367, 389, 567, 579, and 587 vehicles manufactured March 10, 2016, to May 6, 2016. The affected vehicles are equipped with Cummins ISX12 or ISX15 engines and have an engine control module (ECM) that may short circuit, causing the engine to stall without warning without the ability to restart it.

Risk: An engine stall can increase the risk of a crash.

Fix: Cummins will notify owners, and Cummins dealers will replace the defective engine control modules, free of charge. The began on July 8, 2016. Owners may contact Cummins customer service at 1-800-343-7357, Kenworth customer service at 1-425-828-5000 or Peterbilt customer service at 1-940-591-4000. PACCAR's numbers for this recall are 16KWB (Kenworth) and 616-C (Peterbilt).

To see whether a specific car still has an open recall, enter its VIN on NHTSA's official recall lookup. You can also decode a VIN here.

NHTSA defect investigations

  • Quarter Fender Failures (PE20015) — opened Sep 21, 2020, closed Oct 14, 2021.

Other Peterbilt 367 years

← 2016 367 · 2018 367 →

See all Peterbilt 367 problems by year, every Peterbilt model, or the VIN decoder.

Similar Peterbilt models

Embed this 2017 Peterbilt 367 badge on your site

Copy this code into your blog or forum post. It shows live complaint and recall counts and links back here.

Frequently asked questions

What are the most common problems with the 2017 Peterbilt 367?

NHTSA has no owner complaints on file yet.

Was there a recall on the 2017 Peterbilt 367?

Yes, 6 safety recalls. Enter your VIN at NHTSA.gov to check whether the repairs were done on your car.

Was the 2017 Peterbilt 367 a good year?

Complaint data can't fully answer that, because counts aren't adjusted for sales. Compared with other 367 model years, the 2017 has too little data to compare. Always get a pre-purchase inspection and check the VIN for open recalls.