1999 Ford Windstar Problems, Complaints & Recalls

Problem: Ford Motor Company (Ford) is recalling certain model year 1998-2003 Windstar vehicles manufactured September 2, 1997, to July 3, 2003. The affected vehicles were previously remedied to safeguard against the rear axle cracking from corrosion, however, the remedy brackets may have been misinstalled. The incorrect bracket installations may limit the effectiveness of the service repair for NHTSA recalls 10V-385, 12V-193, and 12V-195.

Risk: If the brackets were not installed properly, the rear axle may fracture, affecting the vehicle handling and increasing the risk of a crash.

Fix: Ford will notify owners, and dealers will inspect the brackets to verify their proper installation. If a bracket is found to have been misinstalled, the rear axle will be replaced. These repairs will be performed free of charge. The began on October 21, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S27.

Problem: Ford is recalling certain model year 1998-2003 windstar vehicles manufactured from september 1, 1997, through july 3, 2003, and currently registered or originally sold in virginia. Over time, corrosion can weaken the rear axle making it susceptible to torsional stress. Corrosion and stress can lead to cracks which, if undetected, can increase and result in a complete fracture of the axle.

Risk: A fractured axle can affect vehicle handling and increase the risk of a crash.

Fix: Ford will notify owners, and dealers will inspect and install rear axle reinforcement brackets, or replace the axles, as necessary. This service will be performed free of charge. The recall began on june 19, 2012. Owners may contact ford at 1-866-436-7332.

Problem: Ford is recalling certain model year 1999-2003 windstar vehicles originally sold in or currently registered in the state of virginia. Corrosion-related fractures of the front lower control arm rear attaching brackets and body mount attachments may occur.

Risk: A separation of a front lower control arm rear attaching bracket may result in a lower control arm separation. A separation of both front subframe rear body mounts may result in separation of the steering intermediate shaft. Either condition could result in significant loss of steering control, increasing the risk of a crash.

Fix: Dealers will inspect both front lower control arm rear attaching brackets and both body mount attachments at the rear of the front subframe and make the necessary repairs free of charge. The recall began on june 18, 2012. Owners may contact ford at 1-866-436-7332.

Problem: Ford is recalling certain model year 1998-2003 windstar vehicles manufactured from september 1, 1997, through july 3, 2003, registered in puerto rico. Due to increased stresses caused by high cycles of torsional loading, specific to this market, the rear axle can crack.

Risk: A fractured axle may result in a loss of vehicle control, increasing the risk of a crash.

Fix: Ford will notify owners, and dealers will inspect and install a reinforcement bracket on the rear axle or replace the axles, as necessary. This service will be provided free of charge. The recall began on june 1, 2012. Owners may contact the ford motor company customer relationship center at 1-866-436-7332.

Problem: Ford is recalling certain model year 1999-2003 windstar vehicles originally sold in or currently registered in the states of connecticut, delaware, the district of columbia, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, utah, vermont, west virginia, and wisconsin. A separation of a front lower control arm rear attaching bracket may result in a lower control arm separation. A separation of both front subframe rear body mounts may result in separation of the steering intermediate shaft.

Risk: This could result in reduced steering control increasing the risk of a crash.

Fix: Dealers will inspect both front lower control arm rear attaching brackets, and both body mount attachments at the rear of the front subframe, and make the necessary repairs free of charge. If repairs cannot be made to a vehicle, ford will offer to repurchase the vehicle. The safety recall is expected to begin on or before february 21, 2011. Owners may contact ford at 1-866-436-7332.

Problem: Ford is recalling certain model year 1998-2003 windstar vehicles manufactured from september 1, 1997 through february 28, 2003 and currently registered or originally sold in connecticut, delaware, district of columbia, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, and wisconsin. After many years of vehicle service in these areas, corrosion can weaken the rear axle, making it susceptible to torsional stress. Corrosion and stress can lead to cracks which if undetected can propagate and result in a complete fracture of the axle.

Risk: A fractured axle can affect vehicle handling and increase the risk of a crash.

Fix: As parts become available, dealers will inspect and if necessary install the rear axle reinforcement brackets free of charge. This service will be performed free of charge. The safety recall began on october 20, 2010. Owners may contact ford at 1-866-436-7332.

Problem: Ford is recalling model years 1995-2003 windstar, 2000-2003 excursion diesel, 1993-1997 and 1999-2003 f-250 sd through f-550 sd diesel, 1992-2003 e-150 through e-550, 1995-2002 explorer, 1997 and 2002 mercury mountaineer, 1995-1997 and 2001-2003 ranger, and 1994 f53 vehicles equipped with the texas instruments speed control deactivation switch (scds). The scds may leak internally and then overheat, smoke, or burn.

Risk: A vehicle fire could occur with or without the engine running.

Fix: Ford will notify owners that dealers will install a fused wiring harness in line with the scds. On 1999-2003 windstar vehicles with a leaking scds, dealers will also inspect the abs control module connector and repair as necessary. Repairs will be completed free of charge. The safety recall began on october 27, 2009. Owners may contact ford at 1-888-222-2751.

Problem: Vehicle description: mini vans. Contaminants such as water, salt, and windshield washer solution can enter the wiper motor cover assembly through pinholes on the exterior of the cover that are used in the molding process. In addition, on certain of the vehicles built between february and august 2000, a switch located in the plastic cover of the wiper motor gear case could malfunction and overheat. Either of these conditions could potentially result in loss of intermittent wiper function, loss of wiper park function, complete loss of wiper function, smoke, or ignition of the plastic cover material. Contaminant entry could also result in unintended wiper motor operation.

Risk: Switch malfunction is most likely to occur when the intermittent setting of the wipers is being used, or when snow or ice obstructs the blades from returning to the "parked" position at the bottom of the windshield. Loss of visibility while driving increases the risk of a crash.

Fix: Dealers will install a new wiper cover with improved sealing and water resistance. Owner notification begain august 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1-866-436-7332.

Problem: Vehicle description: mini vans equipped with auxiliary rear air-conditioning. If the auxiliary air-conditioning blower motor stops turning while in the medium-low blower speed setting, there is the potential that the resistor may become hot and smoke.

Risk: The motor could potentially catch on fire.

Fix: Dealers will install a jumper wire that will ensure that the medium-low blower speed setting is protected by the thermal limiter. Owner notification began augsut 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1-866-436-7332.

Problem: Vehicle description: minivans built with instrument clusters without the message center, fail to comply with the requirements of standard no. 118, "power-operated window, partition, and roof panel systems." the power windows may be operable after the ignition has been turned to the "off" position and the front doors are opened.

Risk: The standard requires that power operated windows may be closed only when the key is in the "on," "start," or "accessory" positions, or during the interval between the time the key is turned off, and the opening of either of the vehicle's front doors.

Fix: Dealers will reconfigure the vehicle front end electronic module.

Problem: Vehicle description: minivans. The brake fluid master cylinder is recessed and oriented in the engine compartment so that the brake fluid warning statement embossed on both the top of the filler cap and the side of the reservoir body are not entirely visible by direct view. These vehicles may not fully comply with requirements of fmvss no. 135, "passenger car brake systems."

Fix: Owners will be provided with new labels and installation instructions.